3Shape PC Catalog

Version 22.1
Valid March 17^th 2022

Changes in this version of the PC catalog

Changes from 21.2 to 21.4 include:

• Removal of Dell Precision Workstation 15’ and 17’ (Item #s: 20000211, 20000212 ) Dell Precision 15’ (5550) Tech Specs. and HP Zbook (G7) (Item #: 20000204 and 20000208)
• Addition of new portfolio of laptops to include 3Shape PC Support
• Lenovo Thinkstation specs were updated to reflect the current portfolio

Changes from 21.4 to 22.1 include:

• Revision of HP Zbook technical specs (Item #: 20000214)
• General formatting updates
• Addition of Windows Server 2019 to the recommended DentalDesktop Server PC requirements

This document is subject to change without notice.

All removed and previously approved PC’s can be found in the Legacy PC Catalog here.


Before reading the PC catalog please complete reading all five points as they contain vital information about PC selection
 

The purpose of the PC catalog is to inform customers about which PCs can be used with different 3Shape products

1	The importance of the PC The PC is an important part of the overall 3Shape system. It is the engine on which the software is run, and consequently the software puts some requirements on the PC. Selecting the correct PC will ensure a good user experience and effective workflow for the user. This document outlines how to determine which PC to use for a given 3Shape system or combination of systems. If a combination of 3Shape systems is used, make sure all systems installed on the PC, are updated to the latest version.
2	Selecting a PC   If the system includes TRIOS scanning, a PC from the “List of specific PCs” must be used in order to guarantee proper operation. PCs approved for TRIOS scanning will support the following scanners:  TRIOS standard, TRIOS color, TRIOS 3, TRIOS 3 Wireless, and TRIOS 4. 3Shape cannot guarantee proper operation of a TRIOS Scanner on PCs that are not listed in this PC list. If the system does not include TRIOS scanning, it is also possible to select a PC that complies with the specifications listed in the section “Minimum PC requirements for 3Shape Software packages”.
3	Ordering a PC For ordering information on the PCs delivered by 3Shape, locate the 3Shape item number under the PC name. Not all PCs are available from 3Shape. All PCs are subject to the local availability from the PC manufacturer. Not all models may be available from the PC manufacturer in all regions. Not all models may be available from each reseller.
4	PC Configuration Some PCs allow for variation of specific parameters within some certain limits. In these cases, the variations allowed are denoted by the terms ‘or’/ ‘or more’. The specific PC configuration available from 3Shape will depend on the availability from the PC manufacturers at the date of order. 3Shape will, upon request, inform of the specific PC configuration as delivered by 3Shape.
5	Windows edition 3Shape develops and test the systems for Windows Pro version as this contains several benefits over the Home version. The Pro version will enable the PC to be part of a corporate domain, whereas the Home version will not. For Windows 10, only the Pro version will allow full control of Windows updates.  For full information please refer to the ‘PC setup guide for TRIOS’ document. 3Shape products will in general also work on Windows Home edition, but only the Windows Pro version is tested on a regular basis, why 3Shape clearly recommends Windows Pro.  Important note: TRIOS3 Wireless scanner requires Windows 8.1 or Windows 10.

 

PCs available from 3Shape

This covers PCs available from 3Shape and/or s 3Shape reseller. This list covers PCs for the TRIOS^® scanner (POD Solution).
 

		3Shape Software					May be delivered by
		TRIOS (POD Solution)	TRIOS Design Studio	Ortho System	Implant Studio(7)	Dental System	3Shape	3Shape reseller
	Sales Item: 20000214 - HP Zbook with 3 Year Support HP ZBook 15 (G7 or G8) Display: 15.6 inch FHD (1920x1080) Processor: Intel® Core™ i7-10850H (or more) Memory: 16 GB DDR4 3200 Disk: 256GB SSD Graphics card: NVIDIA® Quadro T1000 (or more) Keyboard: Regional, depending on availability Operating system: Windows 10 Pro  Dim.:  14.15" x 9.21" x 0.9"; 359.4mm x 233.9mm x 22.8mm Weight: 1.9 Kg (4.2 lbs.)	ü	ü(8)	ü(8)	(ü) (8)	(ü) (2,3)	ü	ü
	Sales Item: 20000213 - Dell Precision with Touchscreen with 3 Year Support Dell Precision Workstation 15 (7560)  Display: 15.6" FHD (1920x1080) Touchscreen Processor: Intel Core i7- 11850H Memory: 32GB DDR4 Disk: 1TB SSD Graphics card:   NVIDIA RTX A3000 w/6 GB GDDR6 Keyboard: Regional, depending on availability Operating system: Windows 10 Pro Dim: 14.1" x 9.5" x .98”-1.08”;  360mm x 242mm x 25-27.63mm Weight: 2.49 kg (5.5 lbs)	ü(1)	ü	ü(2)	ü	(ü) (2,3)	ü	ü

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PCs available from 3Shape

This covers PCs available from 3Shape and/or s 3Shape reseller. This list covers PCs for the LAB^® scanners and the Ultra PC Approved for TRIOS use with Pod configurations.
 

		3Shape Software					May be delivered by
		TRIOS (POD Solution)	TRIOS Design Studio	Ortho System	Implant Studio(7)	Dental System	3Shape	3Shape reseller
	LenovoThinkStation P340 - Ultra PC 3Shape item no for TRIOS Pod: 20000128 3Shape item no for LAB: 20000127 3 Years Onsite service Display: 1920 x 1080 resolution minimum (monitor not incl.) Processor:  Intel i7-10700 Memory:  64GB RAM Disk:  1TB NVMe M.2 SSD Graphics Card:  NVIDIA Quadro P2200 5GB Operating system: Windows 10 Pro Keyboard: Regional, depending on availability Dim.: 165mm (6.5”) x 376mm (14.8”) x 328mm (12.9”) Mouse: included	ü(1)	ü	ü(5)	ü	ü(5)	ü	ü
	LenovoThinkStation P340 - High Performance PC 3Shape item no:  20000126 3 Years Onsite service Display: 1920 x 1080 resolution minimum (monitor not incl.) Processor:  Intel i7-10700 Memory: 32 GB RAM Disk:  512GB NVMe M.2 SSD Graphics Card:  NVIDIA Quadro P1000 4GB Operating system: Windows 10 Pro Keyboard: Regional, depending on availability Dim.: 165mm (6.5”) x 376mm (14.8”) x 328mm (12.9”) Mouse: included	Ï	ü	ü(5)	ü	ü(5)	ü	ü
	Lenovo ThinkCentre M70t – Standard PC 3Shape item no: 20000125 3 Years Onsite service Display: 1920 x1080 resolution minimum (monitor not incl.) Processor:  Intel i5-10400 Memory:  16GB RAM Disk:  512GB NVMe M.2 SSD Graphics card:  NVIDIA Quadro P620 2GB Operating system: Windows 10 Pro Keyboard: Regional, depending on availability  Dim.: 145mm (5.7") x 296 mm (11.7") x 346mm (13.6") Mouse: included	Ï	Ï	ü(6)	Ï	ü(6)	ü	ü

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes
1     TRIOS 3 Wireless scanners require Windows 10 OS.
2     Software (Studio/Clinic Apps or Dental System) will not be installed from factory. Reseller must install the software.
3     PC is approved for Dental System design station only. For Dental System scanning, we recommend stationary computers (P340/M720), but all laptop models can also be used.
4    In order to run 3Shape products on Apple computers, Windows need to be installed which therefore requires more setup for the reseller (requires Bootcamp, see instructions on Apple’s website).
5     This PC is sold together with E3, E4, and D/R 2000. Note that PCs for all refurbished models are subject to change and may not be the same as for new units.
6    This PC is sold together with E1 and E2. Note that PCs for all refurbished models are subject to change and may not be the same as for new units.
7     Please refer to the recommendation for Implant Studio when looking for specific PC for X1 Viewer.
8    Only recommended for use as a client in aof Client Server setup.
 

All systems including a TRIOS must be delivered to end users with a configured PC

 

3Shape provides fully functional computer with TRIOS software installed. Alternatively, Reseller purchases, configures and delivers fully functional computer with TRIOS software installed. Please note! Distributor may
be required to exchange some parts (e.g. RAM, disk, etc.), depending on the available configurations by the computer supplier. All specifications are subject to change without notice.

 

PC setup guide

The user experience (especially when using TRIOS) depends to a very large degree on the proper configuration of the PC used. To ensure proper setup of the PCs, 3Shape provides a document intended for distributors of TRIOS^®. It describes all steps required to set up a new PC to enable fast and accurate scans with the TRIOS POD systems (cart systems are delivered fully configured). The document may be found on the 3Shape support site. The document is subject to change.
 

Clinic Software PC Requirements (self-sourced)

This covers requirements for PCs not purchased through 3Shape.

Studio App PC
TRIOS Design Studio, Implant Studio, Splint Studio, Excitement Apps

                    Studio App PC                                Studio App PC                           Dental Desktop Server PC

Desktop Recommended

Resolution:                       Full HD (1920 x 1080)
Processor:                         Intel^® Core^™ i7 8^th Generation or AMD Ryzen^™ 7 2700 or better
Memory:                            32 GB
Disk:                                     1 TB SSD (or more)
Graphics card:                NVIDIA^® GTX 1060 6 GB or better
Operating system:       Windows 10 Pro
Optional:                            Touch screen
3DConnexion Space Mouse Pro

Desktop Minimum

Laptop Recommended

Resolution:                       Full HD (1920 x 1080) with touch
Processor:                         Intel® Core™ i7 8^th Generation / AMD Ryzen^™ 7 3750H or better
Memory:                            32 GB
Disk:                                     1 TB SSD

Graphics card:                NVIDIA^® GTX 1050 4 GB or better
Operating system:       Windows 10 Pro

Dental Desktop Server PC

Recommended

Processor:                        Intel^® Core^™ or Xeon^™ / AMD Ryzen^™ or Epyc^™
                                             8 Cores at 2.1 Ghz or more
Memory:                            16 GB or more
Diskspace:                       1 TB SSD or more (2TB or more for X1)
Operating system:       Windows 10 Pro, Windows Server 2016 or Windows Server 2019
SQL Server:                   Microsoft SQL 2021 Express SP1 (default), Microsoft SQL Server 2016 or
                                         Microsoft SQL Server 2019⁽²⁾

Minimum⁽¹⁾

1. The minimum PC requirements for Dental Desktop Server are for a setup with no more than 10 clients, and where the server will not be used as an active workstation. Please see “Network speed requirements” for requirements to network bandwidth and connection for the server PC. If the Dental Desktop Server PC will be used for TRIOS scanning, the PC needs to be selected from the List of approved PC’s. If the Dental Desktop Server PC will be used as a workstation for Implant- or Design Studio, the PC needs to fulfill the minimum PC requirements for the selected 3Shape product. For more information on client-server setup please refer to the TRIOS Info Pack: Client-Server setup.
2. If you plan to connect to your own (existing) database instead of installing the included SQL Express Server, please check requirements for instance and database settings in the Dental Desktop SQL Server Guide.

Lab PC requirements (self-sourced)

This covers requirements for PCs not purchased through the 3Shape catalogue.

Legend ü       Sufficient ü+    Recommended for improved performance (optional) Ï      Not sufficient		Ortho System	Implant Studio	Dental System (3)
Processor	Intel Core i5	ü	Ï	ü
	Intel Core i7 or equivalent	ü+	ü	ü+
Memory (RAM)	8GB	ü	Ï	ü (1)
	16GB	ü+	ü	ü (1)
	32 GB	ü+	ü+	ü+ (1)
Disk	250GB (conventional or SSD)	ü	Ï	ü(2)
	500GB (conventional or SSD)	ü+	ü	ü+ (2)
	1TB (conventional or SSD)	ü+ (2)	ü+	ü+ (2)
Graphics card(6)	2GB NVIDIA GeForce	ü	ü	ü(3,5)
	4GB NVIDIA GeForce	ü	ü+	ü+(3,5)
	6GB NVIDIA GeForce	ü	ü+	ü+(3,5)
	2GB NVIDIA Quadro	ü	Ï	ü(3,5)
	4GB NVIDIA Quadro	ü	ü	ü+(3,5)
	6GB NVIDIA Quadro	ü	ü	ü+(3,5)
Operating system	Recommended Windows 10 PRO (64bit)	ü+	ü+	ü+
	Supported Windows 10 Home (64bit) Windows 8.1 PRO (64bit) Windows 8.1 Home (64bit) Windows Server 2019	ü	ü	ü
	Supported Windows Server 2012 Windows Server 2016	Ï	Ï	Ï
Monitor resolution	Recommended 1920x1080 (Full HD)	ü+	ü	ü
	1920x1200	ü	ü+	ü
Mouse	With wheel button	ü(4)	ü(4)	ü(4)

Network speed requirements

Legend ü       Sufficient ü+    Recommended for improved performance (optional) Ï      Not sufficient		TRIOS	Ortho System	Implant Studio	Design Studio (Design on separate PC)	Dental System	Dental Desktop Server
Internet upload (1) (Case communication with external partners and online services)	Minimum 5 Mbit/s	ü	ü	ü	ü	ü	ü
	Recommended 25 Mbit/s or faster	ü+	ü+	ü+	ü+	ü+	ü+
Internet download (1)  (Case communication with external partners and online services)	Minimum 5 Mbit/s	ü	ü	ü	ü	ü	ü
	Recommended 25 Mbit/s or faster	ü+	ü+	ü+	ü+	ü+	ü+
Internal network - wired (Wired ethernet, Communication in-house between client and server)	Recommended 1000BASE-T (1 Gbit/s)	ü+	ü+	ü+	ü+	ü+	ü+
Internal network - wireless (Wi-Fi, Communication in-house between client and server)	Recommended 5Ghz 802.11AC (100-300Mbit/s)	ü(2,3)	ü(2)	ü(2,3)	ü(2,3)	ü(3)	Ï (All units in a client server setup must be wired)

1. The effective internet upload and download speed may be tested using free tools available on the internet, e.g. www.speedtest.net
2. The minimum effective upload and download speed between wireless client and dental desktop server: 50 Mbit/s (effective speed)
3. Wired network connection recommended for dedicated design stations for TRIOS Design Studio, Implant Studio and Dental System.

Last Revised: March 15, 2022

______________________________________________________________________________________________________________________________________________________________________________________________

Contact 3Shape Support if you have further questions.

For full information on correct usage please consult the official Safety and Setup Guide and the most current Manual